Colombia raven chat line - Updating ami bios windows 7

I do not believe there is a failure on any drive – only a prediction.[Tuesday, February 01, 2011 PM] — Balaji Makams C says: Ian, please let me know the LED status on these drives.I figured the last time I performed a verify on a P400 controller it took about 4 hours.

updating ami bios windows 7-60

The menu options that I was given only allowed me to assign the spare drives to Array A – the RAID 1 (mirror). [Tuesday, February 01, 2011 PM] — Balaji Makams C says: Ian, if the online spare drive is configured than it will automatically start rebuilding if there is a drive failure in the array.

[Tuesday, February 01, 2011 PM] — Ian Fleming says: I cannot configure an online spare for the array.

The troubling thing about this process was that there was no feedback from the P400 controller as to what was actually going on.

This left me to assume that the drive BIOS update on the drive in Bay 3 failed.

The release notes suggested that there was an issue with one of the drives SMART system and it required updating.

Hoping that the firmware update would fix the alarm, I loaded the freshly downloaded hp.com/go/foundation USB stick and installed the drivers and firmware updates on the Windows OS.

The ACU verified that there was a predicted failure on the drive in Bay 3.

It also suggested that the array was queued for rebuilding.

It will only let me setup a spare on the RAID 1 array [Tuesday, February 01, 2011 PM] — Ian Fleming says: The drive in bay 8 shows up in the ACU as an “Unassigned Drive”.

Tags: , ,